Relays and Monitors
Vossloh Kiepe has its own family of devices for all the car and truck functions that cannot be performed by the mass-produced relays. Vossloh Kiepe designs and manufactures special-purpose devices for situations in which standard products rapidly stop functioning.
|
|
Electronic Blinker Unit Kiepe EBG 107 The electronic blinker unit Kiepe EBG 107 has been developed for heavy-duty application in rail and road vehicles and industrial plants. With its technical features it is especially suitable for controlling LEDs.
|
|
|
Electronic Blinker Unit Kiepe EBG 108 The electronic blinker unit Kiepe EBG 108 has been developed for heavy-duty applications in rail and road vehicles and industrial plants. With its technical features - preheating of looped filament - it is especially suitable for control filament lamps.
|
|
|
Electronic Voltage Monitor Kiepe ESW 101 The electronic voltage monitoring device Kiepe ESW 101 is designed to monitor DC 24 V on rail vehicles. The voltage monitoring device works fully electronically with output relays and can serve as an overvoltage or undervoltage detector.
|
|
|
Contact-Voltage Monitor Kiepe EBW Contact-voltage monitor for continuous controlling of the contact voltage between road surface and the chassis of trolleybuses (line voltage DC 600 V/ control circuits DC 24 V).
|
|
|
Electronic Power Switches Kiepe ELS 100 and ELS 200 The wear-proof electronic power switches Kiepe ELS 100 and Kiepe ELS 200 are designed to control DC 24-V consumers. The power stage which is a MOS field-effect transistor is switched by means of control voltage via a microcontroller. Hence, the main contact as transistor switch is without galvanic insulation.
|
|
|
Electronic Latching Relay Kiepe ETR 101 The electronic latching relay Kiepe ETR 101 has been developed for the control of alternating switching operations on vehicles.
|
|
|
Isolating Relay Module Kiepe RTM 101 und 102 The relay insulating modules Kiepe RTM 101 and Kiepe RTM 102 are used for activating electrical equipment with increased need for insulation as on trolleybuses. The insulation modules have two independent channels, each channel being equipped with a relay.
|
|
|
Electronic Multifunction-Relay Kiepe EZB 400 The Electronic Multifunction Relay Kiepe EZB 400 has been developed for mass transit vehicle applications. It can be used either as an on-delay or off-delay time relay, cut-in or cut-out passing relay or as flasher relay.
|
|
|
The function of the current relay is to break the control voltage to the electromagnetic coil of a contactor with an auxiliary switch when the current exceeds a predetermined set value.
|
Electronic Blinker Unit_EBG107_514.pdf